nanoPAN 5375 Driver Software - Features
The Guarantee for a Short Time to Market
Driver Services
The nanoPAN 5375 Driver Software includes the complete MAC layer and is portable to 8, 16, and 32 bit microcontrollers. To run the driver, a minimum 12 Kbytes ROM/Flash required and a minimum 1 Kbyte RAM required. PC executable can be produced using Microsoft© Visual C
Key Settings
- Provides a means for the transceiver to access upper layers
- Reads and writes values into transceiver registers
- Sets the Logical Network ID (which sets the SyncWord)
- Enables / disables address matching
- Enables / disables Broadcast (Brdcast) or Time Beacon (TimeB) packets
- Enables / disables receiver CRC2 checking
- Sets CRC2 method to detect transmission bit errors
- Sets CSMA/CA (carrier sense method for collision avoidance)
- Enables / disables a backoff scheme for packet collision avoidance
- Enabling / disables Automatic Repeat Request (ARQ) on the receiver
- Sets the transmission output power
- Calibrates frequency of transmission and reception oscillators
- Sets frequency bandwidth
- Selects frequency channel (for narrowband transmission)
- Reads out range (distance) value
- Manually start and stop packet transmission
- Sets the data transmission rate
- Enables / disables FEC
|
 |
nanoLOC Software
Product Information |
|
nanoLOC Products |
|
|
|
|
|